Navigation:  Your Business Setup Options > Station Manager > Station Detail - General > Stations - Devices >

Cash Drawer

Previous pageReturn to chapter overviewNext page

You must activate the option to use the cash drawer by entering codes for the cash drawer.  It is assumed that the cash drawer connects to the printer with a small cable.

Use Cash Drawer - Must be checked if a cash drawer is being used with this station.

Cash Drawer Settings

Cash Drawer Code - The decimal numbers provided by the cash drawer manufacturer which activate the drawer to open.  If more than one number is required, use a comma as a separator.

 -- Possible Codes --

 code 27,112,0,48 - If the printer is an Epson or Samsung brand.  (Use 27,112,0,57 for a longer signal, if necessary)

 code 7 - If the printer is a Star brand, use code 7.

Cash Drawer Port - Choose the port to which the cash drawer is attached.  If the cash drawer is plugged into a receipt printer, use the port of the receipt printer.
Pulse - The signal to open the cash drawer can be extended by increasing the pulse setting from 0 to a 1, 2, or 3.  This is often needed for older models of cash drawers.  Another option is to set the baud rate for older drawers to just 300 baud.
Bypass Direct To Port - (Not Generally Required)  Some cash drawers need to have the signal to open the cash drawer handled differently.  Try this option only if other options fail.
Test Button - Pressing the test button will transmit the cash drawer codes and open the drawer.
Cash Drawer Printer - (Not Generally Required)  The purpose of this field is to link cash drawer operations when the cash drawer is not plugged into the printer.  For example, a serial cash drawer is not plugged into a printer or when the printer is plugged into a USB port instead of a COM or LPT port or for other special scenarios such as a pole display plugged into a receipt printer.

 

-- Setting Up A Serial Cash Drawer --

If your cash drawer is serial and plugs directly into a com port on the computer, follow these steps.

Go to Windows Start: Settings: Printers and add a Generic/Text Only printer driver.  Set this imaginary printer to use the cash drawer com port.  Select this special Generic/Text Only printer driver in the Cash Drawer Printer field.